$ 670.00. Save $ 0
Units Sold: 30
Our 3G Signal Booster provides you the freedom of manual controls and comes with “manual control gain” (MCG). You will need to adjust the MCG accordingly if outdoors and you experience noises that hamper its functionality due to a too-strong signal. Our Mobile Booster Single Band 3G operates on 2100 MHz frequency, supports single band assembly and can handle up to 200 users or calls simultaneously. Our fully supplied installation kit takes only 15 minutes to properly install it.
There are no harmful emissions from our boosters. Health studies and expert researchers totally guarantee it. This model comes with a unique design with an internal cooling function, perfect if you are looking for 4G service enhancement covering the entire Australia. If you are not totally satisfied or have any problems with this product, our 24/7 helpline is available and will help you get your “5-bar” signal back. No waiting for service assistance! This can boost Optus, OtherProviders, Vodafone signals.
In the installation guide you can find a full description of selecting the best location. However, in case you still cannot find a good place you always can contact us through live chat or email and get a recommendation by one of our experts.
Yes! You need to check the location of the nearest tower of your network provider as the standard antenna can accept signal within 170 degrees. In case towers are located on the opposite side of your property and your antenna, you need to upgrade your system by adding a second antenna so you can receive signal from all locations.
Here’s a simple, quick test to check whether your place is suitable for a signal booster.
The only thing you should do is check your outside signal strength on your mobile phone.
Here’s how to do it:
All our products are of high-quality and are capable of simultaneously supporting multiple devices. The limit for each booster mainly depends on its output power or ‘dBs’. Below we have provided a list of devices and their support limit converted to dBs:
Estimations can also be made using this table:
|Coverage in square meters||Number of supported users|
|Up to 150 sq m||Up to 25 users|
|Up to 300 sq m||Up to 50 users|
|Up to 600 sq m||Up to 75 users|
|Up to 1500 sq m||Up to 150 users|
With this simple and quick test, you can check whether your place is suitable for a signal booster or not. What you need to do is to check your outside signal strength on your mobile phone. Here are the steps to do that.