B
Is this mobile booster ACMA approved?
Units Sold: 280
Free Shipping
All of us need the best possible 4G signal, especially in remote areas, where the best you get is a 1 bar fluctuating signal. What we offer you is a powerful booster to forget bout this trouble once and for all.
If you are worried about the installation process, don’t sweat it! It takes only a few simple steps to get the job done! The installation kit contains everything you’ll need, along with a set of step-by-step instructions. Plus, the device is perfectly safe to use, and it’s up to all of the modern standards!
All of our products are delivered free of charge and there are no hidden fees, either. On top of that, you get to enjoy a 2-year warranty, and in case the booster wasn’t a perfect fit, you can return it for a full refund within 30 days!
Up link :15dBm Downlink: 17dBm
a) Power supply LED denote b) Export power LED denote
≥ 31dB / 1dB step
Tpy≤ 6dB(P-P); DCS,PCS ≤ 8dB(P-P)
≤ 2dB/ 3.84MHz,Full Band ≤ 5dB(P-P)
≤5dB
≤2dB
≤2dB
GSM Meet ETSI TS 151 026 V 6.1.0
WCDMA Meet 3GPP TS 25.143 ( V 6.2.0 )
CDMA Meet IS95 & CDMA2000
Meet 3GPP TS 25.143 ( V 6.2.0 )
≤ 12.5%
≤ -35dB@Spreading Factor 256
ρ > 0.980
Meet IS95 & CDMA2000
N-Female
50 ohm
-25ºC~+55ºC
IP40
Power Indicator
Be lighted when there is phone calling
Light is on when Outdoor signal is -65dB
Light is on when Outdoor signal only -55dB
Light is on when Outdoor signal only -50dB
In the installation guide you can find a full description of selecting the best location. However, in case you still cannot find a good place you always can contact us through live chat or email and get a recommendation by one of our experts.
Yes! You need to check the location of the nearest tower of your network provider as the standard antenna can accept signal within 170 degrees. In case towers are located on the opposite side of your property and your antenna, you need to upgrade your system by adding a second antenna so you can receive signal from all locations.
Here’s a simple, quick test to check whether your place is suitable for a signal booster.
The only thing you should do is check your outside signal strength on your mobile phone.
Here’s how to do it:
All our products are of high-quality and are capable of simultaneously supporting multiple devices. The limit for each booster mainly depends on its output power or ‘dBs’. Below we have provided a list of devices and their support limit converted to dBs:
Estimations can also be made using this table:
| Coverage in square meters | Number of supported users |
| Up to 150 sq m | Up to 25 users |
| Up to 300 sq m | Up to 50 users |
| Up to 600 sq m | Up to 75 users |
| Up to 1500 sq m | Up to 150 users |
With this simple and quick test, you can check whether your place is suitable for a signal booster or not. What you need to do is to check your outside signal strength on your mobile phone. Here are the steps to do that.
Thank you
Is this mobile booster ACMA approved?
Up to 1000 sqm
up to 300 sqm
up to 600 sqm
up to 300 sqm
Signal Boosters Australia
Hello Brian, Our signal boosters are CE, ISO; RoHS certified. We have been operating for many years and never had any issue or requests by authorities